ADOLIN · PRIMERS

Silikonlu Universal Astar

ADOLIN professional coating product for the stated application. Follow the product technical data for substrate preparation, dilution, application method, coverage and drying requirements.

PRODUCTPRODUCT INFORMATION

WHATSAPP →TECHNICAL DATA PDF ↗

WHAT IT IS

About the product

Silikonlu Universal Astar is a water based · akrilik kopolimer product from ADOLIN.

Number of coats1 coat

Dilution10–15%

Packaging3.5 kg · 10 kg · 20 kg

APPLICATION

Application instructions

01. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.

02. Mix the product thoroughly and prepare it according to the manufacturer’s technical data.

03. Apply the product with the recommended tool and at the specified dilution/application rate.

04. Observe the required drying and recoating interval before the next coat.

05. Apply additional coats or create the finish according to the selected system and desired effect.

TECHNICAL DATA

Technical data

Coverage100–140 ml/m² · 150–200 g/m²

3.5 kgapproximately 25 m² / 1 coat

Touch dry1–2 hours

Toz tutmama3–4 hours

Hard drying10–12 hours

Rezin tipiAkrilik kopolimer

See technical data1.46 ± 0.10 g/cm³

pH8.5 ± 1

Only manufacturer-matched information is shown. If the original manufacturer TDS is not available in the local archive, it is not presented as an original TDS; the Technical Data PDF shown is a technical summary prepared by Colorstorm.