A solvent-based alkyd semi-matt decorative topcoat for interior and exterior use.
BaseSolvent-based · alkyd
FinishSemi-matt
SurfacesPlaster · wood · metal · brick
UseInterior and exterior
ApplicationBrush · roller · spray
APPLICATION
Application instructions
01. Remove rust, grease and loose old paint from metal surfaces, then prime with a suitable synthetic primer/anti-corrosive primer.
02. Prepare knots and defects on wood surfaces and use the appropriate primer/filler system where required.
03. Allow the primer coat to dry sufficiently before recoating.
04. Dilute the product by approximately 6–8% with synthetic thinner and apply.
05. Two coats are recommended.
TECHNICAL DATA
Technical data
Dilutionapproximately 6–8% synthetic thinner
Coats2
FunctionDecorative topcoat
The information is based on a verified match between the manufacturer’s product family and the Colorstorm stock name. When the original manufacturer TDS is not available in the local archive, it is not presented as an original TDS; the Technical Information PDF shown is a technical summary prepared by Colorstorm.
