Water Based Matt Binder for Tiles
INVEBI · PRODUCT

Water Based Matt Binder for Tiles

Category: Interior / Exterior
INVEBI professional coating product for the stated application. Follow the product technical data for substrate preparation, dilution, application method, coverage and drying requirements.
Application area: INVEBI professional coating product for the stated application. Follow the product technical data for substrate preparation, dilution, application method, coverage and drying requirements.
WHATSAPP →TDS ↗
WHAT IT IS

About the product

Water Based Mattt Binder for Tiles — Clear water-based high-durability finish · resin/ceramic/glass/tile.

BaseWater based
EffectClear · Matt
UseGlass · Flooring · Interior / Exterior
SurfacesGlass · Flooring · Interior / Exterior
PrimerAccording to TDS
ToolSpray, brush or roller.
Number of coatsAccording to TDS
PackagingAccording to TDS
APPLICATION

Application instructions

01
Application

Spray, brush or roller.

02
Mixing

2665**/AZ 100 + IV220/AZ 20 + water 10; it may also be used as a one-component system.

03
Drying

Dust-free in 30–40 min · touch dry in 2–3 h · through-dry in 24 h.

TECHNICAL DATA

Technical data

BrandINVEBI · Italy
Product code2665**/AZ
TypeClear water-based high-durability finish · resin/ceramic/glass/tile
ApplicationSpray, brush or roller.
Mixing2665**/AZ 100 + IV220/AZ 20 + water 10; it may also be used as a one-component system.
Coverage100–120 g/m².
DryingDust-free in 30–40 min · touch dry in 2–3 h · through-dry in 24 h.
Additional informationRecoat without sanding within 60–90 min; sand after 24 h.
Only data present in the current product card is shown. For other parameters, refer to the current TDS.