Water-based acrylic matt wall paint. USP technology is designed to create a smooth, uniform appearance. It offers high hiding power, good covering ability, wash resistance and colour stability for interior and exterior walls.
Completely remove old, loose or blistered paint, dust, lime, grease and other contaminants. Existing paint must be firmly adhered. Repair interior defects with a suitable Nirlat filler and exterior defects with Altek Exterior. After complete drying, apply Aqua Primer indoors and Primer X2 outdoors. A suitable primer should also be used on new white plaster.
Stir well before use. Apply 2 coats by brush, roller or airless spray. Under normal conditions, allow approximately 2 hours between coats.
Dilute with water up to a maximum of 30%, depending on the surface and coat.
Touch dry: approximately 1 hour. Recoating: approximately 2 hours. Full drying: 24 hours. Values are stated for 25°C and approximately 80% RH.