INVEBI A12/000AZ NITRO EXTRA CLEAR SEALER
INVEBI · Interior · Wood · Frames · A12/000AZ

Nitro Extra Clear Sealer

01. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.
02. Spray and or curtain coater.
03. Apply the product with the recommended tool and at the specified dilution/application rate.
04. Observe the required drying and recoating interval before the next coat.
05. Apply additional coats or create the finish according to the selected system and desired effect.
06. Allow the coating to dry and cure fully before putting the surface into service.
TDS PDF
PRODUCT

About the product

Nitro Extra Clear Sealer is a nitro clear sealer / base coat product from INVEBI.

Nitro Extra Clear Sealer is a nitro clear sealer / base coat product from INVEBI.

BrandINVEBI · Italy
Product codeA12/000AZ
TypeNitro clear sealer / base coat
ApplicationSpray and or curtain coater.
MixingA12/000AZ 100 + 105/AZ NC thinner 40.
Coverage100–150 g/m².
Drying / recoating20°C 10 12
APPLICATION

Application instructions

The information is based on data confirmed in the relevant INVEBI technical sheet and stock documentation.

01. Prepare the surface so it is clean, dry and compatible with the product system.
02. Spray and or curtain coater.
03. Mixing / dilution: A12/000AZ 100 + 105/AZ NC thinner 40.
04. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.
05. 20. Allow the coating to dry and cure fully before putting the surface into service.
06. Allow the surface to dry fully before recoating or putting it into service.