INVEBI O16/2502AZ CLEAR HYGRO HARDENING TOP COAT GLOSSY
INVEBI · Flooring · Wood · O16/2502AZ

Clear Hygro Hardening Top Coat Glossy

01. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.
02. Spray, brush and or rulo.
03. Apply the product with the recommended tool and at the specified dilution/application rate.
04. Observe the required drying and recoating interval before the next coat.
05. Apply additional coats or create the finish according to the selected system and desired effect.
06. Allow the coating to dry and cure fully before putting the surface into service.
TDS PDF
PRODUCT

About the product

Clear Hygro Hardening Top Coat Glossy is a 1 product from INVEBI.

Clear Hygro Hardening Top Coat Glossy is a 1 product from INVEBI.

BrandINVEBI · Italy
Product codeO16/2502AZ
Type1
ApplicationSpray, brush or roller.
Mixing16 2502 100 106 127 166 20 h
Coverage80–120 g/m².
Drying / recoating20°C 10–12 3
APPLICATION

Application instructions

The information is based on data confirmed in the relevant INVEBI technical sheet and stock documentation.

01. Prepare the surface so it is clean, dry and compatible with the product system.
02. Spray, brush or roller.
03. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.
04. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.
05. 20. Allow the coating to dry and cure fully before putting the surface into service.
06. Allow the surface to dry fully before recoating or putting it into service.