Sandeco Art / Art Velvet

SAN DECO professional coating product for the stated application. Follow the product technical data for substrate preparation, dilution, application method, coverage and drying requirements.

WHATSAPP →TDS ↗SDS ↗

EFFECT & APPLICATION

Real surface effect

WHAT IT IS

About the product

SAN DECO professional coating product for the stated application. Follow the product technical data for substrate preparation, dilution, application method, coverage and drying requirements.

BaseAcrylic emulsion

EffectSand texture + metallic

UseInterior

SurfacesWalls, plaster, concrete and wood

PrimerDecoprimer

ToolWooden brush / plastic spatula

Number of coats1

Packaging1 kq , 3.2 kq , 9,6 kq

APPLICATION

Application instructions

01. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.

02. Mix the product thoroughly and prepare it according to the manufacturer’s technical data.

03. Apply the product with the recommended tool and at the specified dilution/application rate.

04. Observe the required drying and recoating interval before the next coat.

05. Apply additional coats or create the finish according to the selected system and desired effect.

TECHNICAL DATA

Technical specifications

Coverage6.2–7.6 m²/L

By weight4.9–6 m²/kg

Per 1 m²130–160 ml / 165–205 g

Touch dry4–5 hours

Full drying24 hours

Temperature+5°C – +35°C

Coverage and drying times may vary depending on the actual substrate, temperature, humidity and decorative technique. If the original TDS is available locally, it can be opened using the TDS button above.