INVEBI 1749**/AZ NITRO CLEAR TOP COAT
INVEBI · Interior · Wood · Frames · 1749**/AZ

Nitro Clear Top Coat

01. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.
02. Spray.
03. Apply the product with the recommended tool and at the specified dilution/application rate.
04. Observe the required drying and recoating interval before the next coat.
05. Apply additional coats or create the finish according to the selected system and desired effect.
06. Allow the coating to dry and cure fully before putting the surface into service.
TDS PDF
PRODUCT

About the product

Nitro Clear Top Coat is a nitro clear final coat · 05–95 gloss product from INVEBI.

Nitro Clear Top Coat is a nitro clear final coat · 05–95 gloss product from INVEBI.

BrandINVEBI · Italy
Product code1749**/AZ
TypeNitro clear final coat · 05–95 gloss
ApplicationSpray application.
Mixing1749**/AZ 100 + 105/AZ NC thinner 30.
Coverage110–150 g/m².
Drying / recoating10–15 40–50 12
APPLICATION

Application instructions

The information is based on data confirmed in the relevant INVEBI technical sheet and stock documentation.

01. Prepare the surface so it is clean, dry and compatible with the product system.
02. Spray application.
03. Mixing / dilution: 1749**/AZ 100 + 105/AZ NC thinner 30.
04. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.
05. Prepare the substrate so it is clean, dry, sound and suitable for the coating system.
06. Allow the surface to dry fully before recoating or putting it into service.